01 Product Introduction
The E-Coating conductive rubber with the primer coating process is a kind of conductive rubber with special process and structure, which is very suitable for the application of small-sized extruded rubber strips. Its high conductivity and thin conductive layer not only have a high level of EMI shielding effectiveness but also possess good electrochemical stability. The unique primer coating process of Hazetec can ensure the wear resistance, corrosion resistance reliability of the surface coating and the uniform and consistent aesthetic characteristics. The inner core of the E-Coating conductive rubber with the primer coating process is a non-conductive elastomer, which still has good compression and rebound characteristics even in the case of a very small size. It is an excellent choice for the environmental sealing and electromagnetic shielding of products with small sizes and compact structures. The cost of the non-conductive elastomer is much lower than that of the conductive elastomer. At the same time, the metal coating on the surface of the product is very thin. Therefore, the E-Coating product is also very competitive in terms of cost in the market.
NQ-C7007 has a conductive layer sprayed on the surface. The Ag/Cu conductive particles have excellent shielding performance. At the same time, the spraying process is suitable for developing products with various special-shaped structures and can be widely applied in fields such as national defense and military industry and high-speed communication.

02 Product Features
① The elastic inner layer does not contain metallic fillers, ensuring the best compression performance and aging performance.
② The conductive particles exist only in the outer coating layer, so it has excellent electrical conductivity.

③ The ultra-thin conductive layer significantly reduces the required silver content.
④ Through a special coating process, the cost of precious metals is effectively saved without reducing the electrical conductivity and shielding performance.
⑤ Compared with the elastomer filled with solid materials throughout, the attenuation performance does not decrease under full compression force.
⑥ Extremely low compression force and excellent anti-deformation ability.
⑦ Due to the flexibility in manufacturing and the characteristic of rapid response to customer customization, effective alternative solutions can be provided within a very short period of time.

03、Technical Parameters

04、Pressure-deformation curve